Weather conditions change from time to time. Sometimes they do so without warning. Storms are among the most devastating weather conditions.
They often leave behind a wave of water damage, which results in mold growth. Mold from flooding can be very disastrous if you do not prevent it on time.
The main challenge, therefore, becomes how to prevent it after water damage. It is crucial to know how to handle mold before it turns into a big problem.
First, here are the conditions that facilitate mold growth.
Conditions for Mold Growth
When water gets trapped between behind paneling or walls, the conditions necessary for mold growth will be available. For mold to grow, it requires the following:
- A temperature between 41 degrees and 104 degrees
- A food source (starch and sugar)
An indoor environment is what mold requires to get the optimal conditions of temperature and oxygen.
The paper backing of the dry wall provides the starch and sugar that it requires. Water particles also provide some of the food.
So, here is how to prevent mold after water damage:
First Remove the Water
To start with, you will have to remove of all the flood water around your area. You may need to hire specialized water vacuums for this work. Alternatively, you can use a gallon of water to clear the area.
You need to avoid touching the water, especially if it is from a sewer backup or natural flood. Such water can cause health problems.
To handle such, make sure you use protective gear.
However, if the water is from burst pipes and leakages, you may not require any protective gear.
If you are drying water inside the house, first clean and dry the areas subjected to water. About how to soak up water from floor, a water vacuum can help you.
Take Out Damp Rugs and Carpets
The other key thing to take care of is the damp rugs and carpets. A wet basement carpet is likely to facilitate mold growth.
To prevent mold growth, remove the carpets and damp rugs outside. You can steam clean them to get rid of all contaminants and stop mold from growing.
Remember that these may take a longer period to dry since they are less porous. As such, it is good to dry them out in the sunlight. Sunlight will help to dry them fast and deter formation of mold.
Moreover, failure to dry them outside may result in them spreading to the surrounding areas.
Dry All the Wet Surfaces
The other key area that you will need to take care of is the wet surfaces in your house. Drying these surfaces is critical in preventing mold and removing moisture.
You can start by using a vacuum to suck the water. If that is not effective, a dry rag or mop will help to soak up the water.
The other option is that you use fans. Renting industrial-sized fans will help you to remove every excess moisture. Besides, it will help your room to dry quickly.
How fast does mold grow after a water leak? Mostly, it takes 24 to 48 hours for it to grow. As such, quickly removing excess moisture reduces the chances of its growth.
Keep All Surfaces in Your Home Dry
The other way of dealing with mold is by ensuring your home remains dry. You can keep it away if your room maintains humidity below 50 percent.
One way of achieving this is by the use of a dehumidifier. Alternatively, you can open all the windows, especially if the weather outside is sunny.
The warm temperatures from outside will air your home and prevent mold growth. They will also help to dry your home quickly and keep it dry.
To minimize any chances of mold growth, keep your home dry for a few days.
Get Rid of Damaged Materials
In the aftermath of water damage, your house needs a thorough inspection. Check out for materials that are adversely affected by the water. If they can’t get clean or completely dry, it is recommendable to replace them.
Ensure that the replacement items you buy are mold resistant. For instance, fiberglass is a good replacement for wet drywall.
Frequently Asked Questions
How do you prevent mold from water damage?
First, remove all the water from the affected area as fast as possible. A water vacuum is the best gadget to use. If there are any dump carpets in the room, remove them and dry all surfaces.
Then, dehumidify the room. Doing so keeps moisture at bay and discourages mold growth.
How long does it take for mold to grow after water damage?
Mold prevention after water damage calls for prompt actions. Usually, it takes about 24 to 48 hours for it to grow in proper conditions. All it needs is excess moisture and a space that is a bit dark.
What can I spray on wet wood to prevent mold?
Wet wood is an excellent breeding ground for mold. There are plenty of products out there that claim to stop this. However, the best is Concrobium Mold Control, which has all the rights reserved by the Rust-Oleum company, USA.
This spray is non-toxic and super-resistant to mold growth. Besides, you can use it on other surfaces susceptible to molds apart from wood.
Does water damage always cause mold?
The likelihood of mold growth after water damage is very high. It is important to note that it does not only result from floodwaters.
Simple leaks and plumbing issues can also result in severe mold formations. However, proper measures after water damage deter its formation.
In summary, it is essential to prevent mold from forming after water damage. Mold can cause health problems. Whether it is from flooding or any other cause, make sure you take the necessary preventive measures.
Ensure you drive out any water from around your home. It is also crucial that you dry all the surfaces and air your home. Do not keep any wet rug or carpet in the home, for these will facilitate the conditions suitable for mold growth.